This page includes documents which can guide you through the process of correcting common issues encountered with SMART boards.

Smart Board Trouble Guide(1).xls

Additional Troubleshooting Tips From Smart Technologies
Please Note: The above link takes you outside of the Wiki and will open in a new window.

Airliner Power Issues
Airliner.doc

Review the pictures below to determine which model SMART Board you are using.
680i.jpg
680i2.jpg
Gen3.jpg
Gen. 1
Gen. 2
Gen. 3
How to Replace the lamp in the UF55 and UF65 Projector


Please follow the steps below to change the SMART Board Gen 2 projector bulb.
step_1.jpg
Step 1- Locate bulb covering

step2.jpg
Step 2- Remove screws from outer covering

step3.jpg
Step 3- Remove outer covering

step4.jpg
Step 4- Remove screws on silver plate

step5.jpg
Step 5- Remove silver plate


step6.jpg
Step 6- Locate bulb casing

step7.jpg
Step 7- Lossen screws on bulb casing and remove by gently pulling on casing handle

step8.jpg
Step 8- Carefully insert the new bulb

step9.jpg
Step 9- Replace silver plate and tighten screws

step10.jpg
Step 10- Replace outside covering and tighten screws


Once you have changed the bulb you will need to re-set the lamp hours to begin a new warranty period.
Resetting Lamp Hours.doc